Solar Power Panels Perth are mounted on the roof, in its Southern area, or in any other place where the sun can efficiently reach, at angle of roughly 45 degrees. The panel weight is often tiny, just a couple of dozen pounds, so they should not pose any problems during installation. Furthermore, the panels and tubes can be mounted vertically in those circumstances where the building’s construction does not allow any another solution. Here are a couple of other blessings of using solar panels for residential heating:
A Cheap and Ecological Solution
It has been proven that by employing high-quality solar cells you can reduce the heating costs and also protect the environment over the long run. A huge quantity of CO2 will be evaded during the procedure the equivalent of an automobile which travels for around 10,000 km per year.
The Easy Way to Heat Your House or Office In Winter
If it is properly sized and the amount of Solar Power Panels Perth is sufficient, the solar installation can provide a big contribution to home and office heating in winter. This seriously relies on the building’s construction, its southern exposure, and especially its grade of insulation.
Hot Water Whenever Needed
The solar cell heating system can reach temperatures of almost 270 C, therefore the water temperature within the thermal battery can simply reach 80 C. This interprets into a hot water supply of 75-85 C during summer and 45-55 C in winter. But it is in general best to limit the water’s temperature to about 55 C to prevent limescale’s appearance and for safety reasons.
Maintenance-free Installations Solar Power Panels Perth do not require any sort of upkeep and have an average lifespan of approximately 20 years. Of course, as with other gadgets whose average lifespan is 5-8 years but continue to work even after 10-15 years, solar energy panels can also operate for 25-30 years without Problems. This is particularly enforced by the undeniable fact they do not contain moving parts, and also due to the resistance of materials employed in their production (mainly copper, aluminium, stainless steel and glass).